Reading a Weather Radar Map Without Guesswork

how to read a weather radar map

Staring at a radar map full of colors and unsure what it means for you? To learn how to read a weather radar map, check the color legend, then compare reflectivity, velocity and the loop.

Radar is one tool among many, so pair it with this guide to severe weather safety before storms arrive.

Item Value
Lowest scan used for base reflectivity 0.5 degree elevation
Short-range base reflectivity reach 124 nm (about 143 miles)
Maximum range of precipitation accumulation images 124 nm (about 143 miles)
Moderate rainfall example 40 dBZ, about 10 mm/h
Reflectivity often caused by hail Above 60 dBZ

These figures come from the NWS Birmingham radar guide and a University of British Columbia tutorial. Figures can change, so check the sources before you rely on them.

What does a weather radar map actually show?

A radar sends out pulses of radio waves and listens for the echo that bounces back from objects in the air. The larger the object, the more energy returns, and the travel time tells the radar how far away it is, according to the NWS Melbourne radar explainer.

That means the map shows where objects return energy, not only rain. Returns can also come from bugs, and ground clutter can appear as tiny dots near the radar site itself, as the UBC tutorial explains.

Distance matters as well. The WSR-88D can detect most precipitation within approximately 80 miles of the radar, and intense precipitation within around 140 miles, per the NWS Melbourne page. Treat the far edge of the map with extra caution.

Colors and dBZ: how heavy is the rain?

The numbers on a reflectivity map are in dBZ. Larger values correspond to heavier rain from more intense thunderstorms, while small values mean light rain from shallow clouds or returns from bugs.

The colors themselves are arbitrary, and different weather sites use different ones. Always look at the legend before you interpret the picture.

The UBC tutorial gives these reference points:

  • A reflectivity of 40 dBZ corresponds to about 10 mm/h, a moderate rainfall rate.
  • A thunderstorm cell near Little Rock, Arkansas, peaked at roughly 52 dBZ, which the tutorial calls intense rain.
  • Exceptionally large values, above 60 dBZ, are often caused by hail in thunderstorms.
how to read a weather radar map Radar at sunset
A radar tower stands beyond a grassy field beneath colorful sunset clouds.

Base reflectivity vs composite reflectivity

Most radar pages offer two reflectivity views, and they answer different questions. The NWS Birmingham guide describes them like this:

  • Base reflectivity is the default image, taken from the lowest 0.5 degree slice. The short-range version extends out to 124 nm (about 143 miles) and the long-range version to 248 nm (about 286 miles).
  • Composite reflectivity uses all elevation scans and shows the greatest echo intensity from any elevation angle seen from the radar.

The two can look almost the same, yet the values differ in places. Compare both when a storm looks stronger than you expected.

The National Weather Service radar viewer at radar.weather.gov launched on December 17, 2020. Its radar FAQ says images update more frequently and at four times higher resolution than before.

Reading velocity: which way is the wind going?

A velocity map shows only motion directly toward or away from the radar, called radial velocity. Red colors indicate wind moving away from the radar, and green colors indicate wind moving toward it, per the NWS Birmingham guide.

Know where the radar sits, because it is your reference point for reading the wind. The measured strength will always be less than the real wind unless it blows directly toward or away from the radar, and farther away the reading comes from increasing heights above the surface.

Storm relative motion removes the storm’s own movement so the wind appears relative to the storm. It helps spot small circulations called mesocyclones, which are often areas where tornadoes form.

If a rotation signature shows up near you, review these tornado safety tips and follow official warnings.

Storm shapes and rainfall totals

Cells, lines and bows

A cell is a small region of intense rain that shows up as concentric rings of color, strongest at the center. Cells can organize into a squall line, and a curved version is called a bow echo.

A squall line can move in a different direction from the cells inside it. In the UBC example the line moves east while individual cells move northeast, so use a loop to see real movement.

Rainfall totals

Radar can also estimate how much rain has fallen. One-hour precipitation helps assess rainfall intensity, while storm total precipitation helps locate flood potential and estimate basin runoff.

Both images reach a maximum of 124 nm (about 143 miles) from the radar, so link to an adjacent radar for farther areas. Check the time frame too: the accumulation restarts only after an hour without precipitation anywhere on the radar, which the NWS Birmingham guide says may take up to several days.

A quick routine before you act on a radar map

  1. Find the radar site, the map time and the color legend.
  2. Look at base reflectivity to see where precipitation is, then composite reflectivity for the strongest echoes.
  3. Play the loop to judge direction and speed.
  4. Check velocity for wind and rotation, keeping the radar’s location in mind.
  5. Turn on warnings. Storm-based warnings display by default on the National radar mosaic and Radar station products views, according to the NWS radar FAQ.

Radar pictures do not replace alerts, so learn the difference between a watch and a warning with this guide to watch vs warning weather.

Frequently asked questions

What does dBZ mean on a radar map?

Show answer

It is the unit for reflectivity. The software takes the logarithm of the reflectivity value and expresses it in decibels, so higher dBZ generally means heavier rain.

Why does a velocity map understate wind speed?

Show answer

Radar measures only the part of the wind moving toward or away from it. The reading is therefore less than the actual wind unless the wind moves directly along the beam.

Can radar tell rain from hail or snow?

Show answer

Older radars could see precipitation but could not tell rain, snow or hail apart. Dual-polarization radar sends horizontal and vertical pulses, which helps forecasters identify precipitation type, per the NWS Melbourne page.

How far can radar see?

Show answer

The WSR-88D can detect most precipitation within approximately 80 miles and intense precipitation within around 140 miles. Weak echoes from very intense storms may show up farther away.